Справочник Пользователя для Panasonic KX-MB2061

To indicate the unit’s fax transmission/reception status, one of the following messages will be printed on the
confirmation and journal reports (page 57).

40-42
46-72

FF

R A transmission or reception error occurred. Try

again or check with the other party.

43
44

R A line problem occurred. Connect the telephone line

cord to a different jack and try again.

R An overseas transmission error occurred. Try using

the overseas mode (feature #411 on page 83).

-----

R Remove the jammed document (page 131).

53
54
59
70

R A transmission or reception error occurred because

of a problem with the other party’s fax machine.
Check with the other party.

-----

R The junk fax prohibitor feature of this unit rejected

fax reception.

-----

R The memory is full of received documents due to a

lack of recording paper or a recording paper jam.
Load paper (page 16) or remove the jammed paper
(page 126).

R If the PC fax setting (feature #442 on page 86) is set

to “ALWAYS”, check the connection between the
computer and the unit.

R If the fax preview mode (feature #448 on page 66)

is set to “ON”, use the web browser on the computer
connected via the LAN to view, print or save the
documents, and then erase unnecessary
documents (page 66).

-----

R The document was not fed into the unit properly.

Re-insert it and try again.

-----

R The other party’s fax machine is busy or has run out

of recording paper. Try again.

R The other party’s fax machine rings too many times.

R The other party’s machine is not a fax machine.

Check with the other party.

R The number you dialed is not in service.

-----

R MStopN was pressed and fax communication was

canceled.

-----

R The top cover was opened. Close it and try again.

-----

R Fax transmission or reception was successful.

For assistance, please visit http://www.panasonic.com/help

109

14. . Help