Справочник Пользователя для Panasonic KX-MB2061
Problem
Cause & Solution
I cannot find the unit in the
[Target Device] or [Device
Select] dialog box when
operating the following
functions.
– Scanning
– Remote Control
– PC FAX
– Device Monitor
[Target Device] or [Device
Select] dialog box when
operating the following
functions.
– Scanning
– Remote Control
– PC FAX
– Device Monitor
R The printer driver has not been installed. Install it on your computer
I forgot the password for
feature programming via
remote operation.
feature programming via
remote operation.
R You may have changed the feature programming password. If you do not
remember it, assign a new password using feature #155 (page 79). When
required to enter the current password, enter “0101” instead.
required to enter the current password, enter “0101” instead.
During programming, I
cannot enter the code or ID
number.
cannot enter the code or ID
number.
R All or part of the number is the same as another code or ID. Change the
number:
– remote operation ID (code): feature #306 on page 76, 88.
– fax activation code: feature #434 on page 85.
– remote operation ID (code): feature #306 on page 76, 88.
– fax activation code: feature #434 on page 85.
Email related functions do not
work properly.
work properly.
R For environments where Secure Sockets Layer (SSL) encryption is required
to send and receive email, additional email server configuration and/or the
use of another email system may be required.
use of another email system may be required.
14.3.2 Printing problems
Problem
Cause & Solution
Recording paper is wrinkled
or folded when printed.
or folded when printed.
R Make sure that the recording paper is loaded properly (page 16).
R Try turning the recording paper over or rotating it 180 degrees.
R Try turning the recording paper over or rotating it 180 degrees.
The printing quality is poor
(e.g. has smudges, blurred
points or lines).
(e.g. has smudges, blurred
points or lines).
ABC
R Some paper has instructions recommending which side to print on. Try
turning the recording paper over.
R You may have used paper with a cotton and/or fiber content that is over
20 %, such as letterhead or resume paper.
R The recording paper is too damp. Use new paper.
I changed the recording
paper, but the printing quality
is still poor.
paper, but the printing quality
is still poor.
R The glass or rollers are dirty with correction fluid, etc. Clean them
(page 133, 136). Please do not insert a document before correction fluid
has dried completely.
has dried completely.
R The toner save mode of feature #482 is ON (page 82).
R The remaining toner is low. Replace the toner cartridge.
R To check the drum life and quality, please print the printer test list
R The remaining toner is low. Replace the toner cartridge.
R To check the drum life and quality, please print the printer test list
A blank sheet is ejected.
R You placed the document facing the wrong way when using the copier.
R The other party placed the document in their fax machine the wrong way.
R The other party placed the document in their fax machine the wrong way.
Check with the other party.
For assistance, please visit http://www.panasonic.com/help
115
14. Help