Справочник Пользователя для Panasonic KX-MB2061
8.1 Sending a fax manually
8.1.1 Using the scanner glass
By using the scanner glass, you can send a page from
booklets or small size paper.
booklets or small size paper.
MResolutionN
MContrastN
MRedialN
MFaxN
MStartN
MSetN
1
If the MFaxN light is OFF, turn it ON by pressing
MFaxN.
MFaxN.
2
3
If necessary, change the resolution and contrast
according to the type of document.
R To select the resolution, see page 57.
R To select the contrast, see page 57.
according to the type of document.
R To select the resolution, see page 57.
R To select the contrast, see page 57.
4
Dial the fax number.
5
Press MStartN to scan the document into memory.
Wait until “SCAN:PRESS SET” “SEND:PRESS
START” is displayed.
R To send a single page, go to step 7.
R To send multiple pages, go to the next step.
Wait until “SCAN:PRESS SET” “SEND:PRESS
START” is displayed.
R To send a single page, go to step 7.
R To send multiple pages, go to the next step.
6
Place the next page on the scanner glass. A MSetN
R To send more pages, repeat this step.
R To send more pages, repeat this step.
7
MStartN
#463 on page 81) and the timer before returning to
the default operation mode (feature #464 on
page 81).
the default operation mode (feature #464 on
page 81).
To select the resolution
1. Press MResolutionN repeatedly.
1. Press MResolutionN repeatedly.
– “STANDARD”: For normal-sized characters.
– “FINE”: For small-sized characters.
– “SUPER FINE”: For very small-sized characters.
– “PHOTO”: For photographs, shaded drawings,
– “FINE”: For small-sized characters.
– “SUPER FINE”: For very small-sized characters.
– “PHOTO”: For photographs, shaded drawings,
etc.
2. MSetN
R Using the “FINE”, “SUPER FINE” and “PHOTO”
R Using the “FINE”, “SUPER FINE” and “PHOTO”
settings will increase transmission time.
To select the contrast
Adjust this setting depending on the darkness or
lightness of the document. 5 levels (low to high) are
available.
Press MContrastN repeatedly. A MSetN
Adjust this setting depending on the darkness or
lightness of the document. 5 levels (low to high) are
available.
Press MContrastN repeatedly. A MSetN
Note:
R You can save the previous contrast setting (feature
R You can save the previous contrast setting (feature
To redial the last number
MRedialN
R If the line is busy, the unit will automatically redial the
MRedialN
R If the line is busy, the unit will automatically redial the
number 1 time.
Reserving the fax transmission (Dual Access)
You can reserve a fax transmission even when the unit
is just receiving a fax or sending a fax from memory.
– Up to 3 reservations when sending
– Up to 4 reservations when receiving
1. Set the original during fax reception or fax memory
You can reserve a fax transmission even when the unit
is just receiving a fax or sending a fax from memory.
– Up to 3 reservations when sending
– Up to 4 reservations when receiving
1. Set the original during fax reception or fax memory
transmission.
2. Enter the fax number using the dial keypad,
one-touch dial or phonebook.
3. When using the scanner glass, press MStartN. The
unit will scan 1 page. Place the next document on the
scanner glass and press MSetN. Repeat this until all
the documents are scanned, then press MStartN.
When using the automatic document feeder,
press MStartN.
scanner glass and press MSetN. Repeat this until all
the documents are scanned, then press MStartN.
When using the automatic document feeder,
press MStartN.
R If the document exceeds the memory capacity, the
reservation for that document will be canceled. You
must send the entire document manually.
must send the entire document manually.
Printing a confirmation report
A confirmation report provides you with a printed record
of transmission results. To print the confirmation reports,
make sure that feature #401 is activated (page 83). For
an explanation of the messages, see page 109.
A confirmation report provides you with a printed record
of transmission results. To print the confirmation reports,
make sure that feature #401 is activated (page 83). For
an explanation of the messages, see page 109.
Printing a journal report
A journal report provides you with a printed record of the
30 most recent faxes. To print it manually, see
page 137. To print it automatically after every 30 new
fax transmissions and receptions, make sure feature
A journal report provides you with a printed record of the
30 most recent faxes. To print it manually, see
page 137. To print it automatically after every 30 new
fax transmissions and receptions, make sure feature
57
8. . Fax
8. Fax