Справочник Пользователя для Samsung SR8950
safety information _11
01 SAFETY
INFORMA
TION
CAUTION
Do not move the robotic vacuum cleaner holding the dustbin
part.
part.
This may cause the dustbin to separate, resulting in injury or
-
serious damage to the product.
NOTE
Vacuum cleaning robot may not be able to continue its
operation if it is stuck at the entrance or veranda doorsill.
operation if it is stuck at the entrance or veranda doorsill.
To resume operating, turn the Power Switch off and then on again
-
after moving it to a location where it can continue cleaning.
NOTE
Vacuum cleaning robot cannot completely clean locations that
it cannot reach, such as corners, and spaces between sofas
and walls.
it cannot reach, such as corners, and spaces between sofas
and walls.
Please clean these locations occasionally.
-
NOTE
Dust clusters may remain after cleaning, when the vacuum cleaning robot fails to
pick up dust clusters that were formed while cleaning.
pick up dust clusters that were formed while cleaning.
In this case, sweep up the dust with another cleaning tool.
-
CLEANING AND MAINTENANCE
CAUTION
When cleaning the product, do not spray water directly onto
the exterior or wipe it with a volatile material such as benzene,
thinner or alcohol.
the exterior or wipe it with a volatile material such as benzene,
thinner or alcohol.
This may result in critical damage to the product.
-
CAUTION
The unit must not be disassembled or reconstructed by anyone
other than a qualifi ed service engineer.
other than a qualifi ed service engineer.
This may result in damage to the product.
-
WARNING
Remove any foreign substances accumulated on the Obstacle
and Cliff sensors on a regular basis.
and Cliff sensors on a regular basis.
Dirt accumulated on the sensors will result in inaccurate
-
functioning of the sensors.
Cliff sensor
Cliff sensor
Obstacle sensor
Obstacle sensor
DJ68-00633B.indb 11
DJ68-00633B.indb 11
2011.11.9 1:41:37 PM
2011.11.9 1:41:37 PM