Справочник Пользователя для National Instruments 9211
USB-9211/9211A User Guide and Specifications
4
ni.com
Related Documentation
If your device uses NI-DAQmx Base, refer to
ni.com
to download the
software.
Installing the USB-9211/9211A Device
Installing the Software
Before installing the device, you must install the software you plan to use
with the device. Refer to the
with the device. Refer to the
section of this manual and the
documentation included with the software for more information.
Installing the NI USB-9211/9211A in the USB-9161/9162 Carrier
The NI 9211 module and the USB-9161/9162 carrier are packaged
separately. Refer to Figure 3, while completing the following assembly
steps:
separately. Refer to Figure 3, while completing the following assembly
steps:
1.
Make sure that no signals are connected to the NI 9211 module and the
USB cable is not connected to the device.
USB cable is not connected to the device.
2.
Remove the protective cover from the 15-pin DSUB connector.
Guide
Location
NI-DAQmx Getting Started Guide
Accessible from Start»All Programs»
National Instruments»NI-DAQ after install.
National Instruments»NI-DAQ after install.
NI-DAQmx for USB Devices Getting Started
Guide
Guide
Ships with your device and, after install,
is accessible from Start»All Programs»
National Instruments»NI-DAQ.
is accessible from Start»All Programs»
National Instruments»NI-DAQ.
NI-DAQmx Base Getting Started Guide
Accessible from Start»All Programs»
National Instruments»NI-DAQmx
Bases»Documentation after install.
National Instruments»NI-DAQmx
Bases»Documentation after install.