для Acer altos s300
27
Note: For information on the host connectors, refer to the
documentation supplied with the host system.
documentation supplied with the host system.
The Bus A LED
4
will be on for the top connector, to indicate the first
seven disks are on Bus A. The Bus B LED will be on for bottom
connector to indicate that the remaining seven disks are on Bus B. The
Environmental Services (ES) LED is ON for both the CSM and TSM, to
show that both of their ES blocks are active.
connector to indicate that the remaining seven disks are on Bus B. The
Environmental Services (ES) LED is ON for both the CSM and TSM, to
show that both of their ES blocks are active.
Note: Both I/O modules are at ID 15. These modules actively
monitor one of the two buses, respectively.
monitor one of the two buses, respectively.
For information on the I/O module LED, see page 20.
4
Enclosure must be powered on to see the LEDs.
1
2
1
2
0
I
0
I
To Host
ID 7
To Host
ID 7
CSM
TSM
Mute
The CSM and TSM can be in either I/O slot of the enclosure.
SCSI ID Assignments shown from front of enclosure.