Справочник Пользователя для Acer altos r510 mk2

 Appendix D: SATA RAID Configuration

182

4

Select Factory Default and YES to load the default settings.

5

Exit the configuration utility and press <Ctrl> + <Alt> + <Del> to 
reboot the server.

Creating RAID 1 volume

1

Select Configuration from Management Menu.

2

Select New Configuration from the Configuration menu and select 
YES to continue. An array selection window displays the devices 
connected to the current controller.

3

Press the arrow keys to choose specific physical drives and press 
spacebar to associate the selected drive with the current array. The 
indicator for selected drive change from READY to ONLINE 

4

Add 2 drives to current array and press <Enter> to finish creating 
current array.

5

Press Enter again to select array to configure.

6

Press spacebar to select the array and press <F10> to configure the 
logical drive

7

The default RAID level for 2 disk drives is RAID1. Just select Accept 
to use the default setting and press <Enter> to return to the 
ARRAY SELECTION MENU.

8

Press <Enter> to end the array configuration.

9

Select YES to Save Configuration and press any key to return to the 
Configure menu.

Initialising RAID Volume

1

Press <Esc> to return to the Management Menu.

2

Select Initialize from Management menu. All logical drives should 
be listed under Logical Drives.

3

Press <Spacebar> to select drives for initialization. The selected 
drive will be shown in yellow.

4

After selecting the drives, press <F10> and select YES to start the 
initialization process.

5

When initialization is complete, press any key to continue.

6

Press <Esc> to return to the Management Menu.