Справочник Пользователя для Acer altos r510 mk2

4 Configuring the system

10 Slide the floppy drive assembly into the slimeline bay of the chassis

until it clicks into place. See letter “A” in the figure below.

11 Open the connector labeled “Floppy Con” on the backplane by

pulling up on the connector cover. See letter “B” in the figure
below.

12 Insert the loose end of the floppy cable into the backplane

connector. See letter “C” in the figure below.

13 Push in on the connector cover to lock the cable into place. See

letter “D” in the figure below.

14 Install the chassis cover. For instructions, see

“Installing the Chassis

Cover.”

15 (Optional) Install the front bezel. For instructions, see

“Removing

and Installing the Front Bezel.”

16 Plug all peripheral devices and the AC power cable back into the

server.