Справочник Пользователя для Acer altos r510 mk2

63

 

11 Open the connector on the rear of the floppy drive by pulling up 

on the connector cover. 

12 Insert one end of the flat flex cable end into the floppy drive 

connector. 

13 Push down on the connector cover to lock the cable into place. 
14 Slide the carrier assembly into the left hard drive bay until it clicks 

into place. See letter “A” in the figure below.

15 Open the connector labeled “Floppy Con” on the backplane by 

pulling up on the connector cover. See letter “B” in the figure 
below.

16 Insert the loose end of the flat flex cable into the backplane 

connector. See letter “C” in the figure below.

17 Push in on the connector cover to lock the cable into place. See 

letter “D” in the figure below.