Справочник Пользователя для Acer acerpower 6200
BIOS Utility
2-25
4.
Press
to exit the System Security screen and return to the
main menu.
5.
Press
to exit the BIOS utility. A dialog box appears asking if
you want to save the CMOS data.
6.
Select
Yes
to save the changes.
Bypassing the Setup Password
If you forget your setup password, you can bypass the password
security feature by hardware. Follow these steps to bypass the
password:
security feature by hardware. Follow these steps to bypass the
password:
1.
Turn off and unplug the system.
2.
Open the system housing and SW1 switch 3 is set to
On
to
bypass the password function.
3.
Turn on the system and enter the BIOS utility. This time, the
system does not require you to type in a password.
system does not require you to type in a password.
You can either change the existing Setup
password or remove it by selecting
password or remove it by selecting
None
.
Refer to the previous section for the
procedure.
procedure.
2.6.5
Power On Password
The Power On Password secures your system against unauthorized
use. Once you set this password, you have to type it whenever you
boot the system. To set this password, enter the BIOS utility, select
System Security, then highlight the Power On Password parameter.
Follow the same procedure as in setting the Setup password.
use. Once you set this password, you have to type it whenever you
boot the system. To set this password, enter the BIOS utility, select
System Security, then highlight the Power On Password parameter.
Follow the same procedure as in setting the Setup password.
Make sure to set SW1 switch 3 to
Off
to
enable the Power On password.