Инструкции По Обслуживанию для Acer TravelMate 430

Chapter 4

93

Index of Flash BIOS Error Message

Index of flashing BIOS Error Message using PHLASH.EXE.

BIOS backup not supported in PLATFORM.BIN

Current Platform.bin does not support BIOS backup. 
Please contact your vendor for latest platform.bin or 
remove BIOS backup

File Open/Read/Close failed on PLATFORM.BIN

Make sure that PLATFOR.BIN files is present and not 
damaged. Also check if there is enough space for 
rewriting.

Unsupported PLATFORM.BIN file version

Make sure the platform.bin is the correct version.

Device table in PLATFORM.BIN has unsupported flash 
type

Current Flash ROM part is not supported in this 
platform.bin

Part ID not found in table of supported parts

Current Flash ROM part is not supported in this 
platform.bin

Open/Read failed on BIOS ROM image file

Make sure the BIOS ROM image is present, and not 
damaged. 

Copy BIOS ROM again.

File Close failed on BIOS.ROM

Make sure the BIOS ROM image is present, and not 
damaged. 

Copy BIOS ROM again.

Cannot flash when Memory Managers (e.g. EMM386) are 
present

Please boot to pure DOS without EMM386 is present in 
order to flash BIOS.

Attempt to read flash memory ID failed

System cannot read its Flash Part ID, please try again.

If problem appears after second try, please contact your 
vendor.

File does not contain the same BIOS part number

Make sure the BIOS ROM is for your platform.

Write/Erase to flash memory failed

During Flashing Process, writing and erasing memory 
failed. Make sure the ROM part that you flash is not 
damaged.

New DMI string is too large

Please add/mode=3 parameter after phlash.exe to flash 
DMI data structures.

Could not find BCPDMI block in BISO ROM file image

Remove d/mode=3 parameter after phlash.exe because 
there is no DMI structure present in your BIOS images.

Cannot flash when Memory Managers (e.g. HIMEM) are 
present

Please boot to a pure DOS without HIMEM.sys installed 
before you flash BIOS.

BIOS ROM file may be corrupt (checksum not zero)

Make sure the BIOS ROM is not damaged.

BIOS ROM file size does not match flash part size

Make sure the BIO ROM is not damaged and its size is the 
same as Flash part size.

RTC does not present or does not function- can’t flash 

RTC is probably damaged.

Check RTC battery and RTC time.