Справочник Пользователя для Acer x1130pa

28

English

Appendices

Troubleshooting

If you experience a problem with your Acer projector, refer to the following 
troubleshooting guide. If the problem persists, please contact your local reseller 
or service center.

Image Problems and Solutions

#

Problem

Solution

1

No image appears 

onscreen

•

Make sure all the cables are correctly connected as 
described in the "Getting Started" section.

•

Ensure none of the connector pins are bent or 
broken.

•

Check if the projection lamp has been securely 
installed. Please refer to the "Replacing the Lamp" 

section.

•

Make sure you have removed the lens cap and the 
projector is switched on.

2

Partial, scrolling 

or incorrectly 

displayed image 

(For PC (Windows 

95/98/2000/XP))

•

Press "RESYNC" on the control panel or remote 
control.

•

For an incorrectly displayed image:

•

Open "My Computer > Control Panel," and 
then double-click the "Display" icon.

•

Select the "Settings" tab.

•

Verify that your display resolution setting is 
lower than or equal to UXGA (1600 x 1200).

•

Click the "Advanced Properties" button.

If the problem still appears, change the monitor display 

you are using and follow the steps below:

•

Verify that the resolution setting is lower than 
or equal to UXGA (1600 x 1200).

•

Click the "Change" button under the 
"Monitor" tab.

•

Click "Show all devices > Standard monitor 
types" under the SP box, and choose the 

resolution mode you need under the "Models" 

box.

•

Verify that the resolution setting of the 
monitor display is lower than or equal to UXGA 

(1600 x 1200).