Инструкции По Обслуживанию для Apple performa 400 series
Troubleshooting
Symptom Charts/Miscellaneous - 14
System
intermittently
crashes or locks up
1 Make sure System is version 7.0.1 (or later) for Macintosh
Performa 400 or version 7.1 or later for other Performa
400 Series computers.
2 Make sure software is known-good.
3 Replace SIMMs.
4 Replace logic board. Retain customer’s SIMMs.
5 Replace power supply.
No sound from
speaker
1 Verify that volume setting in Control Panel is 1 or above.
2 Replace speaker.
3 Replace logic board. Retain customer’s SIMMs.
Clock doesn’t run
1 Replace battery. See “Battery Replacement” in Additional
Procedures.
2 Replace logic board. Retain customer’s SIMMs.