Справочник Пользователя для Alcatel-Lucent speedtouch 500
109
DHCP Commands
dhcp relay ifconfig
Configures a relay interface.
SYNTAX:
EXAMPLE:
RELATED COMMANDS:
dhcp relay ifconfig
intf = <interface name>
[relay = <{off|on}>]
[maxhops = <number{0-16}>]
[remoteid = <password>]
[trusted = <{no|yes}>]
[relay = <{off|on}>]
[maxhops = <number{0-16}>]
[remoteid = <password>]
[trusted = <{no|yes}>]
intf
The name of the dynamic interface to be configured.
REQUIRED
relay
Sets the relay status.
OPTIONAL
maxhops
A number between 0 and 16.
Represents the maximum number of hops allowed in the DHCP
packet.
Default is 4.
Represents the maximum number of hops allowed in the DHCP
packet.
Default is 4.
OPTIONAL
remoteid
Sets the remote id as specified in RFC3046.
OPTIONAL
trusted
Drop/Forward DHCP request packet when the DHCP Relay Agent
Option is enabled (with the command :dhcp relay config
agentinfo=on) and the giaddr field is 0 (RFC3046).
Option is enabled (with the command :dhcp relay config
agentinfo=on) and the giaddr field is 0 (RFC3046).
OPTIONAL
=>dhcp relay ifconfig
intf = pppoa_pppoa
[relay] = off
[maxhops] = 4
[remoteid] =
[trusted] = no
=>
intf = pppoa_pppoa
[relay] = off
[maxhops] = 4
[remoteid] =
[trusted] = no
=>
Sets the relay configuration settings.
Show all dynamic interfaces.