Справочник Пользователя для Alcatel-Lucent speedtouch 500
114
DHCP Commands
dhcp server config
Show/set SpeedTouch™ DHCP server configuration settings.
SYNTAX:
EXAMPLE:
RELATED COMMANDS:
dhcp server config
[autodhcp = <{off|on}>]
[scantime = <number>]
[state = <{disabled|enabled}>]
[trace = <{off|on}>]
[scantime = <number>]
[state = <{disabled|enabled}>]
[trace = <{off|on}>]
autodhcp
Allow the SpeedTouch™ to present itself as DHCP client
(AutoDHCP mode) at boot time and probe for another DHCP
server on the network for some time before starting its own DHCP
server (yes) or immediately start the DHCP server (no).
(AutoDHCP mode) at boot time and probe for another DHCP
server on the network for some time before starting its own DHCP
server (yes) or immediately start the DHCP server (no).
OPTIONAL
scantime
A number between 0 and 1814400 (seconds).
Represents the time the SpeedTouch™ scans for another DHCP
server to be active in the network.
By default the scantime is 20 seconds.
Represents the time the SpeedTouch™ scans for another DHCP
server to be active in the network.
By default the scantime is 20 seconds.
OPTIONAL
state
State of the DHCP server (enabled/disabled).
OPTIONAL
trace
Disable verbose console logging and generation of debug traces (off)
or enable verbose console logging and generation of debug traces
(on).
By default tracing is disabled.
or enable verbose console logging and generation of debug traces
(on).
By default tracing is disabled.
OPTIONAL
=>dhcp server config
autodhcp: on
scantime: 20s
state: disabled
tracing: off
=>dhcp server config scantime=30 tracing=on
=>dhcp server config
autodhcp: on
scantime:30s
state: disabled
tracing: on
=>
autodhcp: on
scantime: 20s
state: disabled
tracing: off
=>dhcp server config scantime=30 tracing=on
=>dhcp server config
autodhcp: on
scantime:30s
state: disabled
tracing: on
=>
Show current DHCP server state and statistics.