Справочник Пользователя для Alcatel-Lucent speedtouch 500
161
Eth Commands
eth ifconfig
Configure the Ethernet port.
SYNTAX:
RELATED COMMANDS:
eth ifconfig
intf = <number {1-4}>
type = <{auto|10BaseTHD|10BaseTFD|100BaseTHD|100BaseTFD}
or number>
type = <{auto|10BaseTHD|10BaseTFD|100BaseTHD|100BaseTFD}
or number>
intf
The Ethernet interface to configure.
REQUIRED
type
The Ethernet type.
Select either:
Select either:
•
auto
Auto negotiation of Ethernet communication speed (10Mb/s or
100Mb/s) and Duplex mode (half duplex or full duplex).
Auto negotiation of Ethernet communication speed (10Mb/s or
100Mb/s) and Duplex mode (half duplex or full duplex).
•
10BaseTHD
10Mb/s communication speed in half duplex mode.
10Mb/s communication speed in half duplex mode.
•
10BaseTFD
10Mb/s communication speed in full duplex mode.
10Mb/s communication speed in full duplex mode.
•
100BaseTHD
100Mb/s communication speed in half duplex mode.
100Mb/s communication speed in half duplex mode.
•
100BaseTFD
100Mb/s communication speed in full duplex mode.
100Mb/s communication speed in full duplex mode.
or enter a number between 0 (auto) and 5 (100BaseTFD).
Note
By default, the Ethernet type is set to auto and should
never be changed, except in case of communication
problems.
never be changed, except in case of communication
problems.
REQUIRED
Show Ethernet port configuration and current operating mode