Справочник Пользователя для Alcatel-Lucent speedtouch 500

CLI Navigation

E-SIT-CTC-20030410-0049 v1.0

Accessing the Command Line Interface

Users can access the Command Line Interface via a Telnet session. This requires that TCP/IP connectivity exists
between the host from which the Telnet session is opened and the SpeedTouch™500Series.
.As soon a session to the CLI is opened, the SpeedTouch™500Series banner pops up, followed by the CLI prompt.
In case the SpeedTouch™500Series is protected by a System password, authentication will be required before access is
granted.
The following figure shows an example of the SpeedTouch™500Series banner after opening a session and
authentication.

/home/doejohn{1}$ telnet 10.0.0.138
Trying 10.0.0.138...
Connected to 10.0.0.138.
Username :
Password : ######
------------------------------------------------------------------------
*
*

______

Speedtouch 510

___/_____/\

/\\

Version R4.2.0.15.0

_____/__

/\_____/___ \

/\ \

THOMSON

_______//_______/

/ _\/______

/ \

/ /

__/

/ /

/ _\__

/ /

\_______\/

/ /

* /_/______/___________________/ /________/ /___/

* \ \

___________

\ \

\_\

\ \

\ \___\/

\ \

\_____/

\ \________\/

/__________/

_____

/_____\/

\ /

/___\/

/____/

/___\/

\____\/

*
------------------------------------------------------------------------
=>