Справочник Пользователя для Alcatel-Lucent speedtouch 500
211
IP Commands
ip rtadd
Add a route to the SpeedTouch™ routing table.
SYNTAX:
EXAMPLE:
RELATED COMMANDS:
ip rtadd
dst = <ip-address>
[dstmsk = <ip-mask(dotted or cidr)>]
[label = <{}>]
[gateway = <ip-address>]
[intf = <interface name>]
[metric = <number{0-100}>]
[dstmsk = <ip-mask(dotted or cidr)>]
[label = <{}>]
[gateway = <ip-address>]
[intf = <interface name>]
[metric = <number{0-100}>]
dst
The destination IP address(es) for this route.
Supports cidr notation.
Supports cidr notation.
REQUIRED
dstmsk
The destination IP address mask.
OPTIONAL
label
The name of the label.
OPTIONAL
gateway
The IP address of the next hop. Must be directly connected.
The parameters ‘gateway‘ and ‘intf‘ are mutually exclusive.
The parameters ‘gateway‘ and ‘intf‘ are mutually exclusive.
OPTIONAL
intf
Only for special interface routes: the outgoing IP interface name.
The parameters ‘gateway‘ and ‘intf‘ are mutually exclusive.
The parameters ‘gateway‘ and ‘intf‘ are mutually exclusive.
OPTIONAL
metric
The metric for this route (weight factor).
OPTIONAL
=>ip rtlist
Destination Label
Gateway
Intf Mtrc Status
10.0.0.0/24
10.0.0.140
eth0
0
[UP]
10.0.0.140/32
10.0.0.140
eth0
0
[UP]
127.0.0.1/32
127.0.0.1
loop
0
[UP]
=>ip rtadd dst=10.10.0.0/24 src=10.0.0.0/24 gateway=10.0.0.140
=>ip rtlist
=>ip rtlist
Destination Label
Gateway
Intf Mtrc Status
10.0.0.0/24
10.0.0.140
eth0
0
[UP]
10.10.0.0/24
10.0.0.140
eth0
0
[UP]
10.0.0.140/32
10.0.0.140
eth0
0
[UP]
127.0.0.1/32
127.0.0.1
loop
0
[UP]
=>
Remove a route from the routing table.
Show current routing table.