Справочник Пользователя для Alcatel-Lucent speedtouch 500
229
IPoA Commands
ipoa ifconfig
Configure an IPoA interface.
SYNTAX:
EXAMPLE:
ipoa ifconfig
intf = <string>
[dest = <intfname>]
[qos = <string>]
[encaps = <{llc/snap|vcmux}>]
[retry = <number {0-65535}>]
[dest = <intfname>]
[qos = <string>]
[encaps = <{llc/snap|vcmux}>]
[retry = <number {0-65535}>]
intf
The name of the Routed IPoA interface to configure.
REQUIRED
dest
The destination for this interface. Typically a phonebook entry.
This parameter needs only to be specified in case of an interface created
without specified destination.
This parameter needs only to be specified in case of an interface created
without specified destination.
OPTIONAL
qos
The name of a configured Quality Of Service book entry.
If not specified, the default Quality Of Service book entry will be used.
If not specified, the default Quality Of Service book entry will be used.
OPTIONAL
encaps
The type of encapsulation to be used for this bridge interface.
Choose between:
Choose between:
•
llc/snap
•
vcmux
OPTIONAL
retry
A number between 0 and 65535.
Represents the number of Wide Area Network (WAN) connection setup
retries before giving up.
By default the retry value is 10.
Represents the number of Wide Area Network (WAN) connection setup
retries before giving up.
By default the retry value is 10.
OPTIONAL
=>ipoa iflist
IPoA_PVC1
IPoA_PVC1
:
dest : Br4
Retry : 10
Retry : 10
QoS : default
Encaps : llc/snap
Fcs : off
Connection State : connected
=>ipoa ifconfig intf=IPoA_PVC1 encaps=llc/snap retry=15
=>ipoa iflist
Moreipoa
=>ipoa iflist
Moreipoa
:
dest : Br4
Retry : 15
Retry : 15
QoS : default
Encaps : llc/snap
Fcs : off
Connection State : connected
RX bytes: 0
RX bytes: 0
frames: 0
TX bytes: 0
frames: 0
dropframes: 0
=>