Справочник Пользователя для Alcatel-Lucent speedtouch 500

NAT Commands

nat config

Configure NAT parameters for IP session.

SYNTAX:

EXAMPLE:

nat config

[timeout_ICMP = <string>]
[timeout_UDP = <string>]
[timeout_TCP = <string>]
[timeout_TCP_nego = <string>]
[timeout_other = <string>]
[ike_port = <{fixed|floated}>]

timeout_ICMP

The interval of time for which an ICMP protocol session is allowed 
to remain valid without any activity.
Syntax: <HH:MM> or <MM>.

OPTIONAL

timeout_UDP

The interval of time for which an UDP protocol session is allowed 
to remain valid without any activity.
Syntax: <HH:MM> or <MM>.

OPTIONAL

timeout_TCP

The interval of time for which an TCP protocol session is allowed 
to remain valid without any activity. This time-out value applies to a 
TCP session during its data transfer phase.
Syntax: <HH:MM> or <MM>.

OPTIONAL

timeout_TCP_nego

The interval of time for which an TCP protocol session is allowed 
to remain valid without any activity. This time-out value applies to a 
TCP session during its establishment and termination phases.
Syntax:<HH:MM> or <MM>.

OPTIONAL

timeout_other

The interval of time for which an IP session for a protocol other 
than ICMP, UDP and TCP is allowed to remain valid without any 
activity.
Syntax: <HH:MM> or <MM>.

OPTIONAL

ike_port

The IKE outside port number. This is the translation port number 
for IKEv1 (fixed to 500 or floated).

OPTIONAL

=>nat config
Timeout ICMP idle

:

00h01m

Timeout UDP idle

:

00h05m

Timeout TCP idle

:

00h15m

Timeout TCP negotiation idle :

00h02m

Timeout Other idle

:

00h01m

IKE outside port number

: Floated

=>