Справочник Пользователя для Alcatel-Lucent speedtouch 500
269
NAT Commands
nat defserver
Define the default server behind the SpeedTouch™ NAT/PAT device that receives all (unknown) incoming packets.
In typical LAN configurations one local 'default' server will be responsible for all WAN-LAN mail, http, ftp, ... connec-
tivity. This command allows to specify this server. For specific services, use :nat create.
In typical LAN configurations one local 'default' server will be responsible for all WAN-LAN mail, http, ftp, ... connec-
tivity. This command allows to specify this server. For specific services, use :nat create.
SYNTAX:
EXAMPLE INPUT/OUTPUT:
nat defserver
[addr = <ip-address>]
addr
The IP address of the server (on the ‘inside‘) that will receive all
(unknown) incoming packets.
If not specified, the current default server is shown.
(unknown) incoming packets.
If not specified, the current default server is shown.
OPTIONAL
=>nat defserver
Default server is undefined
=>nat defserver addr=10.0.0.1
=>nat defserver
Default server is 10.0.0.1
=>
Default server is undefined
=>nat defserver addr=10.0.0.1
=>nat defserver
Default server is 10.0.0.1
=>