Справочник Пользователя для Alcatel-Lucent speedtouch 500
300
PPPoA Commands
pppoa iflist
Show current configuration of all or a specified PPPoA interface(s).
SYNTAX:
EXAMPLE INPUT/OUTPUT:
RELATED COMMANDS:
pppoa iflist
[intf = <intfname>]
intf
The name of the PPPoA interface.
If this parameter is not specified, all PPPoA interfaces are shown.
If this parameter is not specified, all PPPoA interfaces are shown.
OPTIONAL
=>pppoa iflist
pppoa_pppoa: dest : pppoa
pppoa_pppoa: dest : pppoa
[00:00:00]
Retry : 10
QoS default
encaps VC-MUX
mode = IP routing
flags = echo magic accomp restart mru addr route savepwd
dns metric = 0
flags = echo magic accomp restart mru addr route savepwd
dns metric = 0
trans addr = pat
mru = 1500
route : dst=0.0.0.0/0 - src=10.0.0.0/1 (metric 1)
auth = auto
auth = auto
user = johndoe@ISP
password = ********
admin state = up
oper state = down
link state = retrying
LCP : state = starting
retransm = 1
term. reason =
IPCP: state = initial
retransm = 0
term. reason =
pppoa2: dest : pppoa2
[00:00:00]
Retry : 10
QoS default
encaps VC-MUX
mode = IP routing
flags = echo magic accomp restart mru addr savepwd
dns metric = 0
flags = echo magic accomp restart mru addr savepwd
dns metric = 0
mru = 1500
auth = auto
user =
password =
admin state = down
oper state = down
link state = not-connected
LCP : state = initial
retransm = 10
term. reason =
IPCP: state = initial
retransm = 0
term. reason =
=>
Create a new PPPoA interface.
Attach a PPPoA interface.
Configure a PPPoA interface.
Delete a PPPoA interface.
Detach a PPPoA interface.