Справочник Пользователя для Alcatel-Lucent speedtouch 500

ADSL Commands

adsl config

Show/set the Asymmetric Digital Subscriber Line (ADSL) configuration.
Although the same command for both SpeedTouch™ ADSL/POTS and SpeedTouch™ ADSL/ISDN variants, the 
command features specific parameter values per variant:

SYNTAX for ADSL/Plain Old Telephone Service (POTS) variants:

SYNTAX for ADSL/Integrated Services Digital Network (ISDN) variants:

Note

Executing the :adsl config without specifying parameters, shows the current ADSL configuration.

adsl config

[opermode = <{ansi|g.dmt_annex_a|g.lite|multimode}>]
[maxbitspertoneUS = <number{10-14}>]
[trace = <{off|on}>]

opermode

The operational mode of the SpeedTouch™ modem.
Choose between:

•

ansi

•

g.dmt_annex_a

•

g.lite

•

multimode

By default the SpeedTouch™ will start in multimode.

OPTIONAL

maxbitspertoneUS

A number between 10 and 14 (bits per tone).
Represents the maximum number of bits which can be allocated to 
each ADSL DMT tone in the upstream direction.
By default the modem will use up to 13 bits per tone.

OPTIONAL

trace

Enable/Disable adsl tracing

OPTIONAL

adsl config

[opermode = <{etsi|g.dmt_annex_b|multimode}>]
[maxbitspertoneUS = <number{10-14}>][trace = <{off|on}>]

opermode

The operational mode of the SpeedTouch™ modem.
Choose between:

•

etsi

•

g.dmt_annex_b

•

multimode

By default the SpeedTouch™ will start in multimode.

OPTIONAL

maxbitspertoneUS

A number between 10 and 14 (bits per tone).
Represents the maximum number of bits which can be allocated to 
each ADSL DMT tone in the upstream direction.
By default the modem will use up to 13 bits per tone.

OPTIONAL

trace

Enable/Disable adsl tracing

OPTIONAL