Справочник Пользователя для Alcatel-Lucent speedtouch 500

System Commands

system config

Show/set SpeedTouch™ system configuration parameters.

Note

For a good operation of Universal Plug and Play (UPnP) and the discovery mechanism, it is highly recom-
mended not to change the System config settings.

SYNTAX:

EXAMPLE:

system config

[upnp = <{disabled|enabled}>] 
[mdap = <{disabled|enabled}>]
[drst = <{disabled|enabled}>]
[digestauth = <{disabled|enabled}>]
[strictusername = <{disabled|enabled}>]
[dcache = <{disabled|enabled}>]

upnp

Enable (enabled) or disable (disabled) Universal Plug and Play (UPnP) 
discovery. 
By default UPnP discovery is enabled.

OPTIONAL

mdap

Enable (enabled) or disable (disabled) proprietary discovery 
protocol.
By default MDAP discovery is enabled.

OPTIONAL

drst

Enable / disable DRST access. 
By default DRST access is disabled.

OPTIONAL

digestauth

Enable / disable HTTP digest authentication. 
By default HTTP digest authentication is disabled.

OPTIONAL

strictusername

Enable / disable strict username check. 
By default strict username check is disabled.

OPTIONAL

dcache

Enable (enabled) or disable (disabled) data cache.
By default data cache is enabled.
For internal use only. Do not alter in any way.

OPTIONAL

=>system config
upnp discovery

: enabled

mdap discovery

: enabled

drst support

: disabled

digest authentication : disabled
strict username

: disabled

dcache

: enabled

=>