Справочник Пользователя для Alcatel-Lucent speedtouch 500
375
Systemlog Commands
systemlog send
Send syslog messages from the internal SpeedTouch™ Syslog message buffer to a specified local or remote syslog
server host.
server host.
SYNTAX:
Note
There will be no notification on whether the host has received the messages or not.
systemlog send
[fac = <supported facility name>]
[sev = <supported severity name>]
[hist = <{no|yes}>]
dest = <ip-address>
[sev = <supported severity name>]
[hist = <{no|yes}>]
dest = <ip-address>
fac
Optionally, Specify the facility name of the syslog messages to show.
Use one of the supported facility names (See
Use one of the supported facility names (See
for a listing of syslog facility names supported
by the SpeedTouch™).
Do not specify to show messages of any facility.
Do not specify to show messages of any facility.
OPTIONAL
sev
Specify the lowest priority severity of the syslog messages to show.
Specifying a severity actually means specifying to show the syslog
messages with a severity as specified, and all messages with a higher
severity.
Use one of the supported severity names (See
Specifying a severity actually means specifying to show the syslog
messages with a severity as specified, and all messages with a higher
severity.
Use one of the supported severity names (See
for a listing of syslog facility names
supported by the SpeedTouch™).
OPTIONAL
hist
The show messages over several SpeedTouch™ reboots (yes) or
show only messages since latest startup (no).
show only messages since latest startup (no).
OPTIONAL
dest
The IP address of the remote host on the local or remote network,
i.e. the collector's IP address, to send the syslog messages to.
i.e. the collector's IP address, to send the syslog messages to.
REQUIRED