Справочник Пользователя для Alcatel-Lucent speedtouch 500
40
ATM Commands
atm oam ccconfig
Configure Operation and Maintenance (OAM) Continuity Check (CC) on the connection.
SYNTAX:
RELATED COMMANDS:
atm oam ccconfig
port = <{dsl0|dsl1|atm2|atm3|aal5|atm5} or number>
vpi = <number{0-15}>
[vci = <number{0-511}>]
[transmit = <{disabled|enabled}>]
[receive = <{disabled|enabled}>]
[auto = <{disabled|enabled}>]
[span = <{segment|end2end}>]
vpi = <number{0-15}>
[vci = <number{0-511}>]
[transmit = <{disabled|enabled}>]
[receive = <{disabled|enabled}>]
[auto = <{disabled|enabled}>]
[span = <{segment|end2end}>]
port
ATM port number.
Choose between:
Choose between:
•
DSL0
•
DSL1
•
ATM2
•
ATM3
•
AAL5
•
ATM5
Or specify a port number (dsl0 has port number 0, ..., atm5 has port
number 5).
The parameter DSL0 is replaced by the parameter ADSL0 for the
SpeedTouch™570.
number 5).
The parameter DSL0 is replaced by the parameter ADSL0 for the
SpeedTouch™570.
REQUIRED
vpi
A number between 0 and 15.
Represents the Virtual Path Identifier (VPI)
Represents the Virtual Path Identifier (VPI)
REQUIRED
vci
A number between 0 and 511.
Represents the Virtual Channel identifier (VCI).
Use VCI=0, or do not specify for a VP cross-connection.
Represents the Virtual Channel identifier (VCI).
Use VCI=0, or do not specify for a VP cross-connection.
OPTIONAL
transmit
Enable (enabled) or disable (disabled) transmission of CC cells.
By default transmission of CC cells is disabled.
By default transmission of CC cells is disabled.
OPTIONAL
receive
Enable (enabled) or disable (disabled) loss of continuity.
By default loss of continuity is disabled.
By default loss of continuity is disabled.
OPTIONAL
auto
Enable (enabled) or disable (disabled) remote CC activation and
deactivation.
By default remote CC activation/deactivation is disabled.
deactivation.
By default remote CC activation/deactivation is disabled.
OPTIONAL
span
End2end or segment continuity check
OPTIONAL
Show current CC configuration.