Справочник Пользователя для Alcatel-Lucent speedtouch 536

Internet Access in No Time

E-DOC-CTC-20050429-0034 v1.0

3.1.1 Installing USB drivers

USB connection

You may want to connect your computer to the SpeedTouch™ using the USB port. 
To be able to do so, you must install the corresponding USB driver.

Supported operating

systems

USB connection on the SpeedTouch™ is supported for following 

Microsoft Operating Systems:

MS Windows 98SE

MS Windows Millennium

MS Windows 2000

MS Windows XP

You may need the Windows installation CD during installation.

Mac Operating Systems:

Mac OS X 10.2 (Jaguar)

Mac OS X 10.3 (Panther)

Installing Windows USB

drivers

The first time you connect the SpeedTouch™ to your computer through a USB 
interface, as soon as you plug the USB cable into the computer, you will be prompted 
for a USB driver.
You will find the required USB driver software on the Setup CD, you just entered in 
your computer’s CD-ROM or DVD-ROM drive. The installation is plug and play, 
meaning that installation will require almost no effort.
Proceed as follows:

Insert the blue USB cable provided into the SpeedTouch™ USB port marked with 
the USB logo. 

The other end of the USB cable fits in (one of) the USB port(s) of your 
computer. In most cases your computer's USB port is marked with the same 
USB symbol.

Windows will automatically recognise the Thomson USB Remote NDIS device:

The installation procedure might be slightly different depending on the 
MS Windows OS you are using.

An USB logo looks like this: 

You can also connect your computer to the SpeedTouch™ via a USB 
hub, provided that the hub is autonomously powered.