Справочник Пользователя для Alcatel-Lucent OmniAccess 3500
OmniAccess 3500 Nonstop Laptop Guardian Administration Guide
• Authentication Methods — [Authentication Methods], [Authentication Methods],
[rw]
Clicking on the <RADIUS Server> link provides access to the configuration of
RADIUS servers for the authentication of end user and management system
administrators. Existing entries can be inspected, modified, and deleted using the
<Open>, <Edit>, and <Delete> tabs respectively.
Clicking on the <RADIUS Server> link provides access to the configuration of
RADIUS servers for the authentication of end user and management system
administrators. Existing entries can be inspected, modified, and deleted using the
<Open>, <Edit>, and <Delete> tabs respectively.
o
Server IP Address — IP address of the RADIUS server.
o
Authentication Port — Specifies the UDP destination port for authentication
requests (the default value is 1812).
requests (the default value is 1812).
o
Accounting Port — Currently not used – specifies the UDP destination port for
accounting requests (Default 1813).
accounting requests (Default 1813).
o
Timeout (secs.) — The time interval (in seconds) that the OmniAccess 3500
NLG gateway waits for the Radius server to reply before retransmitting (Default
30).
NLG gateway waits for the Radius server to reply before retransmitting (Default
30).
o
Shared Secret — Specifies the authentication and encryption key for all RADIUS
communications between the gateway and the RADIUS server. This key must
match the encryption used on the RADIUS daemon.
communications between the gateway and the RADIUS server. This key must
match the encryption used on the RADIUS daemon.
o
Authentication Method — Authentication method used – CHAP (use challenge)
or PAP (simple password).
or PAP (simple password).
Figure 99 - Radius Configuration (Add)
128