Справочник Пользователя для Alcatel-Lucent speedtouch 510 v5

Basic Installation

E-DOC-CTC-20050429-0010 v1.0

2.1 Installing your SpeedTouch™

SpeedTouch™ housing

The SpeedTouch™ can be mounted on a wall, setup upright or simply be placed as a 
desktop.

Wall mount

To mount the SpeedTouch™ on a wall or other vertical surface:

Drill two holes in the wall or other vertical surface where you want to place the 
SpeedTouch™. Keep a space of 110 millimetres between the two holes. 

Fasten two screws in the wall holes. The screws should protrude five 
millimetres from the surface of the wall.

Attach your SpeedTouch™ on the wall using the two mounting slots on the 
bottom side.

Stand-up

To setup the SpeedTouch™ in an upright position, use the provided cradle (if 
available). 

If you install the SpeedTouch™ onto plasterboard, use dowels to secure 
the screws. Otherwise the strain of the cables connected to the 
SpeedTouch™ rear panel connectors could pull the SpeedTouch™ from 
the wall.