Справочник Пользователя для Alcatel-Lucent speedtouch 180
1 SpeedTouch™180 Installation
E-DOC-CTC-20040401-0003 v2.0
8
1.2 SpeedTouch™180 Installation
Before you start
Before installing the SpeedTouch™, verify that you have all the items listed under the
Package Contents list. If any of the items are missing or damaged, contact your local
distributor. Also be sure that you have all the necessary cabling before installing the
wireless gateway.
Package Contents list. If any of the items are missing or damaged, contact your local
distributor. Also be sure that you have all the necessary cabling before installing the
wireless gateway.
Connect the
power supply
Always check first whether the power supply adapter provided is suitable for the local
power specifications. Contact your Service Provider in case of any doubt.
The power inlet on the SpeedTouch™ is marked “Power”.
Plug the adapter's coaxial jack into the SpeedTouch™'s power inlet and plug the power
supply into a power socket outlet.
power specifications. Contact your Service Provider in case of any doubt.
The power inlet on the SpeedTouch™ is marked “Power”.
Plug the adapter's coaxial jack into the SpeedTouch™'s power inlet and plug the power
supply into a power socket outlet.
Connect your
computer
Connect the SpeedTouch™ to your computer using the Ethernet cable provided with
your SpeedTouch™180.
your SpeedTouch™180.
Note
At the end of the installation you may be asked to reconnect your device.
SpeedTouch™180
configuration
To configure the SpeedTouch™180 according to the specific needs of your network,
see
see
.