Справочник Пользователя для Alcatel-Lucent speedtouch 180
3 Support
E-DOC-CTC-20040401-0003 v2.0
35
Wireless problems
Problem
Action
A wireless PC cannot associate
with the device.
with the device.
Make sure the wireless clients use the same
SSID settings as the SpeedTouch™.
SSID settings as the SpeedTouch™.
You need to have the same security settings
on the clients and the SpeedTouch™.
on the clients and the SpeedTouch™.
If you are using a WPA RADIUS server make
sure the RADIUS server is still active.
sure the RADIUS server is still active.
Poor wireless connectivity or
reach.
reach.
Move your wireless clients closer to the
SpeedTouch™ to find a better signal. If the
signal is still weak, change the angle of the
antenna.
SpeedTouch™ to find a better signal. If the
signal is still weak, change the angle of the
antenna.
There may be interference, possibly caused by
microwave ovens or cordless phones. Change
the location of the interference sources or of
the SpeedTouch™.
microwave ovens or cordless phones. Change
the location of the interference sources or of
the SpeedTouch™.
Change the wireless channel on the Access
Point.
Point.
Check that the antenna, connectors, and
cabling are firmly connected.
cabling are firmly connected.
The SpeedTouch™ cannot be
detected by a wireless client.
detected by a wireless client.
The distance between the SpeedTouch™ and
wireless clients is too far.
wireless clients is too far.
Make sure the wireless clients use the same
wireless settings (SSID and security settings)
as the SpeedTouch™
wireless settings (SSID and security settings)
as the SpeedTouch™
In Repeater mode, a loop has been
detected.
detected.
A broadcast storm has resulted from incor-
rect set up.
rect set up.