Справочник Пользователя для Alcatel-Lucent tribe 3000

Скачать
Страница из 26
13
14
Getting started
 .....................
Set-up
1.1 
Removing and installing the back cover
 Removing and installing the battery
Removing and inserting the SIM card
 (1)
(1)
  Check with your network operator to make sure that your SIM card is 3V or 
1.8V compatible. The old 5 Volt cards can no longer be used. Please contact 
your operator.
Place the SIM card with the chip facing downwards/upwards and slide it 
into its housing. Make sure that it is correctly inserted. To remove the 
card, press it and slide it out.
Charging the battery 
(1)
Connect the battery charger to your phone and mains socket respectively.
The charging may take about 20 minutes to start if the battery is flat.
• 
Be careful not to force the plug into the socket.
• 
Make sure the battery is correctly inserted before connecting the 
• 
charger.
The mains socket must be near to the phone and easily accessible (avoid 
• 
electric extension cables).
When using your telephone for the first time, charge the battery fully 
• 
(approximately 3 hours). You are advised to fully charge the battery (   ).
To reduce power consumption and energy waste, when battery is fully 
• 
charged, disconnect your charger from the plug; reduce the backlight 
time, etc.
 
The charge is complete when the animation stops.
(1)
  Depending on your country.