Справочник Пользователя для Aopen ax53-3

AMI BIOS Utility

Press 

y

 or 

w

 key then 

e

 or simply click on an option to select.  Select 

Save

changes and Exit

 to save the changes that you made.  Select 

Do

not save changes and Exit

 to leave setup without saving your

changes.  Select 

Continue

 if you want to make any more configuration

changes.

The NCR 53C810 SCSI BIOS resides in the same flash memory chip as the
system BIOS.  To use the onboard NCR BIOS, install an NCR 53C810 SCSI
controller card in your system.
All SCSI devices that you install in your system require software drivers.  The
NCR SCSI BIOS directly supports SCSI hard disks under DOS, Windows and
OS/2.  It also uses DOS-format and SCO UNIX-format support floppy disk
device drivers that come with the NCR 53C810 SCSI controller card.  The
DOS-format device drivers are for SCSI devices used with DOS, Windows
NT, Novell NetWare and OS/2.  The SCO UNIX-format device drivers are for
SCSI devices used with SCO UNIX.  These drivers offer higher performance
than the direct BIOS support.
To use the device drivers, you must install them in your system hard disk drive
and add them to your system configuration files.  For detailed installation
instructions, see the README files that come with the drivers.