Справочник Пользователя для Aopen ax5t-awd
AWARD BIOS
3-39
4. After the old BIOS has been successfully saved, press "Y" to replace BIOS.
5. DO NOT turn off the power during "FLASHING".
6. Reboot the system by turn off the power after "FLASHING".
7. Press "DEL" key to enter BIOS setup during POST.
8. Reload the "BIOS SETUP DEFAULT" and reconfigure other items as
5. DO NOT turn off the power during "FLASHING".
6. Reboot the system by turn off the power after "FLASHING".
7. Press "DEL" key to enter BIOS setup during POST.
8. Reload the "BIOS SETUP DEFAULT" and reconfigure other items as
previous set.
9. Save & Exit. Done!
Warning: DO NOT turn off the power during
"FLASHING". If the BIOS programming is
"FLASHING". If the BIOS programming is
not
successfully finished, the system will not be boot
again, and you may need to physically replace the
BIOS chip.
again, and you may need to physically replace the
BIOS chip.
Tip: You may load back original BIOS "BIOS.OLD" by
the same procedure.
the same procedure.