Справочник Пользователя для Aopen mk77mv
- 28 -
Jumpers
Clear CMOS (JP1)
JP1 is used to clear CMOS data. Clearing CMOS will result in the permanent
erasing of previous system configuration settings and the restoration of original
(factory-default) system settings.
erasing of previous system configuration settings and the restoration of original
(factory-default) system settings.
Pin 1-2 (Default)
Pin 2-3 (Clear CMOS)
BIOS Write Protection (JP2)
JP2 is used to protect BIOS from abnormal writing.
You may choose to place jumper cap on pins 1-2 for BIOS write protection;
however, please place jumper cap on pins 2-3 if you need to reflash BIOS.
You may choose to place jumper cap on pins 1-2 for BIOS write protection;
however, please place jumper cap on pins 2-3 if you need to reflash BIOS.
To enable reflashing
the BIOS
Pin 2-3 (Default)
the BIOS
Pin 2-3 (Default)
BIOS write protection
Pin 1-2
Pin 1-2
A1
A2
1
JP1
1
1
1
JP2
1
1