Справочник Пользователя для Aopen n250al
Connecting Serial ATA
To connect a serial ATA disk, you have to have a 7-pin serial ATA cable. Connect
two ends of the serial ATA cable to the serial ATA header on the motherboard and
the disk. Like every other traditional disk, you also have to connect a power cable.
Please be noted that it is a jumper free implement; you don’t need to set jumpers
to define a master or slave disk. When serial ATA hard disks are installed on serial
ATA ports, the one connected on Port1(SATA1) will be set as the first boot device
automatically. Please note that it doesn’t support Hot-Plug in function.
two ends of the serial ATA cable to the serial ATA header on the motherboard and
the disk. Like every other traditional disk, you also have to connect a power cable.
Please be noted that it is a jumper free implement; you don’t need to set jumpers
to define a master or slave disk. When serial ATA hard disks are installed on serial
ATA ports, the one connected on Port1(SATA1) will be set as the first boot device
automatically. Please note that it doesn’t support Hot-Plug in function.
17
SATA
Port2
Port2
SATA
Port1
Port1
SATA
Port6
Port6
SATA
Port5
Port5
SATA
Port4
Port4
SATA
Port3
Port3
Only for n250a-FR