Справочник Пользователя для Aopen n250al
Chapter 4 Special Features and Utilities
Chapter 4 Special Features and Utilities
RAID (Redundant Array of Independent Disks)
This motherboard supports RAID 0, RAID 1 and RAID 0+1 (n250a-FR only)
functions. For more RAID introduction, please visit our website:
functions. For more RAID introduction, please visit our website:
RAID Configuration Utility
Nvidia nForce3 250 chipsets support RAID 0 and RAID 1 functions. In order to
make sure your system can recognize and operate Serial ATA RAID device
smoothly, we have to enter RAID Configuration Utility to do some settings. After
finishing the BIOS setup and reboot, you will see [Press F10 to enter RAID setup
utility] about half way through the boot up. Pressing F10 immediately, you will
later be presented with a screen as shown below, You can use this utility to create
or delete your disk arrays.
make sure your system can recognize and operate Serial ATA RAID device
smoothly, we have to enter RAID Configuration Utility to do some settings. After
finishing the BIOS setup and reboot, you will see [Press F10 to enter RAID setup
utility] about half way through the boot up. Pressing F10 immediately, you will
later be presented with a screen as shown below, You can use this utility to create
or delete your disk arrays.
NVIDIA RAID IDE ROM BIOS 4.34
Copyright (c) 2003 NVIDIA Corp.
Detecting array…
Press F10 to enter RAID setup utility
SiI 3114 SATARAID BIOS Version 5.0.34
Copyright (c) 1997-2004 Silicon Iamge, Inc.
Copyright (c) 2003 NVIDIA Corp.
Detecting array…
Press F10 to enter RAID setup utility
SiI 3114 SATARAID BIOS Version 5.0.34
Copyright (c) 1997-2004 Silicon Iamge, Inc.
Press <Ctrl+S> or F4 to ebter RAID utility
Note: F
or operating RAID 0 or RAID 1 smoothly, user has to install both NVIDIA
RAID CLASS DRIVER and NVIDIA NForce Storage Controller.
36