Справочник Пользователя для Aopen mx3l
Overview
1-9
For Internal Modem Card (AOpen MP56):
1. Go into BIOS setup , Power Management Æ 0V Wake On Modem, select
1. Go into BIOS setup , Power Management Æ 0V Wake On Modem, select
Enable.
2. Setup your application, put into Windows 95 StartUp or use Suspend to
Hard Drive function.
3. Turn system power off by soft power switch.
4. Connect 4-pin Modem Ring-On cable from MP56 RING connector to MX3L
4. Connect 4-pin Modem Ring-On cable from MP56 RING connector to MX3L
WOM connector.
5. Connect telephone line to MP56. You are now ready to use Modem Ring-
On.
For External Box Modem:
1. Go into BIOS setup , Power Management Æ Modem Wake Up, select
Enable.
2. Setup your application, put into Windows 95 StartUp or use Suspend to
Hard Drive function.
3. Turn system power off by soft power switch.
4. Connect RS232 cable of external box Modem to COM1 or COM2.
5. Connect telephone line to external box Modem. Turn on Modem power
4. Connect RS232 cable of external box Modem to COM1 or COM2.
5. Connect telephone line to external box Modem. Turn on Modem power
(you must keep Modem power always on). You are now ready to use
Modem Ring
Modem Ring
Tip: External modem wake up signal is detected through
COM1 or COM2. Internal modem card wake up signal is
detected through cable from connector RING (on modem
card) to WOM (on mainboard).
COM1 or COM2. Internal modem card wake up signal is
detected through cable from connector RING (on modem
card) to WOM (on mainboard).
Tip: You can combine Suspend to Hard Drive, 0V Wake
On Modem and the software Acephone for the best
solution of answering machine or to send/receive fax.
On Modem and the software Acephone for the best
solution of answering machine or to send/receive fax.
Note: If you use external modem, the power of external
modem must be kept on to receive signal from telephone
line. Internal modem card has no such limitation.
modem must be kept on to receive signal from telephone
line. Internal modem card has no such limitation.