Справочник Пользователя для ASUS AP100

II. System Components

Side Panel

Side Panel

The side panel needs to be removed to gain access to the internal system.

Side Panel Removal Procedure:
1. Remove the padlock if one is used on the side panel.
2. Remove the thumb screw on the back of the side panel.
3. Pull the side panel away from the chassis from the back.
4. Pull the bottom of the side panel outward from the bottom.

Stabilizing Link Bar

The stabilizing link bar needs to be removed in order to access the mother-
board or remove the 3.5” device cage. To remove the stabilizing link bar,
grasp the bar at the back end with the right hand and with the right thumb
press the back of the chassis toward your fingers (or using the palm of your
left hand, press on the back of the chassis). The bar then releases from the
latch and swings outward.