Справочник Пользователя для ASUS AP100

II. System Components

CD-ROM  / Expansion

CD-ROM Disk Drive

The CD-ROM disk drive mounts only in the 5.25” device cage and requires
signal and power connections like that of IDE hard disk drives. The power
and signal cable is straightforward with connectors designed to only fit cor-
rectly. The red stripe of the signal and power cables should face each other.

Expansion Cards

Expansion cards can be easily installed just like any standard PC computer.
Up to 4 PCI or 2 ISA (1 slot is shared allowing a maximum of 5 cards at one
time) cards can be installed. One AGP slot is also available for a high-end
graphics card.

Expansion Card Installation Procedure:
1. Follow the static precautions described in the

front of this manual.

2. Switch off your system and all peripheral de-

vices and remove the main power cord.

3. Remove the side panel to the chassis.
4. Find an unused expansion slot on the mother-

board and unscrew the metal cover plate from
the slot and put the screw to one side.

5. Ensure the jumpers (if any) are correctly set on

your expansion card

6. Align the card’s connector with the expansion

slot on the motherboard and gently lower and push the card into the free
slot.

7. Secure the card to the expansion slot with the screw you removed from

the metal plate.

8. Attach cables or wires if necessary.
9. Reinstall the side panel if no other work is needed inside the chassis.

 NOTE:

 A CD-ROM audio cable is

also provided in case you install an au-
dio card. The only function of the audio
cable is to allow you to direct the CD
audio out signal to your audio card. Data
signals travel through the IDE cable.