Справочник Пользователя для ASUS A7N8X-LA

3.  System memory

The motherboard comes with two Double Data Rate (DDR) Dual Inline Memory
Module (DIMM) sockets. These sockets support up to 2GB system memory using
184-pin unbuffered non-ECC PC2700/PC2100 double-sided DDR DIMMs.

The following figure illustrates the location of the DDR DIMM sockets.

Make sure to unplug the power supply before adding or removing DIMMs or
other system components. Failure to do so may cause severe damage to both
the motherboard and the components.

Follow these steps to install a DIMM.

1. Unlock a DIMM socket by pressing

the retaining clips outward.

2. Align a DIMM on the socket such that

the notch on the DIMM matches the
break on the socket.

3. Firmly insert the DIMM into the socket

until the retaining clips snap back in
place and the DIMM is properly
seated.

You may install 64MB, 128MB, 256MB, 512MB, and 1GB DDR DIMMs into the
DIMM sockets using the memory configurations in this section.

CAUTION: DIMMs are keyed to fit with only one direction.  DO NOT force a
DIMM into a socket to avoid damaging the DIMM.

80 Pins

104 Pins

DDR1

DDR3