Справочник Пользователя для ASUS am6010ev-m

Quick Setup 

This chapter will guide you through the steps necessary to configure your AAM6010EV-M. 

1.  If you enable the “DSL Auto-connect”, the AAM6010EV-M will detect available VPI/VCI from 

your ISP. If you don’t enable it, please manually input the VPI/VCI, which are assigned by 

your ISP, and click 

 (Figure 5.1). 

 

2.  Choose the proper connection type, like PPPoA, PPPoE, MER, IPoA or Bridging, and the 

encapsulation mode (LLC/SNAP-Bridging or VC/MUX), then click 

. 

 

Figure 5.2 Choose proper connection type