Справочник Пользователя для ASUS lx plus desktop motherboard m5a78l-m lx plus

2-14

Chapter 2: BIOS information

ECC Mode [Disabled]

Allows you to set the ECC mode. Configuration options: [Disabled] [Basic] [Good] 

Selects the primary display adapter. Configuration options: [GFX0-GPP-IGFX-PCI] [GPP-

GFX0-IGFX-PCI] [PCI-GFX0-GPP-IGFX] [IGFX-GFX0-GPP-PCI]

GFX0: primary video controller on a PCIe x16 slot 

GPP:  primary video controller on a PCIe x1 slot 

IGFX: onboard display output port 

PCI:  primary video controller on a PCI slot

Value (Core 0) / (Core 1) / (Core 2) / (Core 3) [-2%]
These items only appear when you set Advanced Clock Calibration to [Per Core] 

and allow you to set the overclocking percentage for each process core separately. 

Configuration options: [0%] [+2%] [+4%] [+6%] [+8%] [+10%] [+12%] [-2%] [-4%] 

[-6%] [-8%] [-10%] [-12%]

Bank Interleaving [Auto]

Allows you to enable the bank memory interleaving. Configuration options: [Disabled] 

[Auto]

Channel Interleaving [XOR of Address bit]

Allows you to enable the channel memory interleaving.  

Configuration options: [Disabled] [Address bits 6] [Address bits 12]  

[XOR of Address bits [20:16, 6]] [XOR of Address bits [20:16, 9]]

Enable Clock to All DIMMs [Disabled]

Enables unused Clocks to DIMMs even though memory slots are not populated. 

Configuration options: [Disabled] [Enabled]

MemClk Tristate C3/ATLVID [Disabled]

Allows you to enable or disable MemClk Tri-Stating during C3 and Alt VID. 

Configuration options: [Disabled] [Enabled]

Memory Hole Remapping [Enabled]

Allows you to enable or disable memory remapping around memory hole. 

Configuration options: [Disabled] [Enabled]

DCT Unganged Mode [Always]

Allows you to select the unganged DRAM mode (64-bit width).