Справочник Пользователя для ASUS m4n68t v2

5. 

When the CPU is in place, push down the socket 

lever to secure the CPU. The lever clicks on the side 

tab to indicate that it is locked.

6. 

Install a CPU heatsink and fan following the 

instructions that comes with the heatsink package. 

You can also refer to section 1.6.2 Installing 

heatsink and fan for instructions.

7. 

Connect the CPU fan cable to the CPU_FAN connector on the motherboard.

DO NOT forget to connect the CPU fan connector! Hardware monitoring errors can occur if 

you fail to plug this connector.

3. 

Position the CPU above the socket such that the CPU 

corner with the gold triangle matches the socket corner 

with a small triangle.

4. 

Carefully insert the CPU into the socket until it fits in place.

The CPU fits only in one correct orientation. 

DO NOT force the CPU into the socket to 

prevent bending the pins and damaging the 

CPU!

2. 

Press the lever sideways to unlock the 

socket, then lift it up to a 90°-100° angle.

Ensure that the socket lever is lifted up to a 90°-100° 

angle; otherwise, the CPU will not fit in completely.

CPU_FAN

CPU FAN PWM

CPU FAN IN

CPU FAN PWR

GND

Chapter 1: Product introduction

1-8