Справочник Пользователя для ASUS p2eb
ASUS P2E-B User’s Manual
15
III. INSTALLATION
Jumper Settings
1. Real Time Clock (RTC) RAM (CLRTC)
The CMOS RAM is powered by the onboard button cell battery. To clear the
RTC data: (1) Unplug your computer, (2) Short solder points, (3) Turn on your
computer, (4) Hold down <Delete> during bootup and enter BIOS setup to re-
enter user preferences.
RTC data: (1) Unplug your computer, (2) Short solder points, (3) Turn on your
computer, (4) Hold down <Delete> during bootup and enter BIOS setup to re-
enter user preferences.
RTC RAM
CLRTC
Clear Data
[short solder points momentarily]
R
P2E-B Clear RTC RAM
CLRTC
2. Keyboard Power Up (KBPWR)
This allows you to disable or enable the keyboard power up function. Set this
jumper to Enable if you wish to use your keyboard (by pressing the space bar) to
power up your computer. This feature requires an ATX power supply that can
supply at least 300mAmp on the +5VSB lead. The default is set to Disable
because not all computers have the appropriate ATX power supply. Your com-
puter will not power on if you set this to Enable and are not using the proper
ATX power supply.
jumper to Enable if you wish to use your keyboard (by pressing the space bar) to
power up your computer. This feature requires an ATX power supply that can
supply at least 300mAmp on the +5VSB lead. The default is set to Disable
because not all computers have the appropriate ATX power supply. Your com-
puter will not power on if you set this to Enable and are not using the proper
ATX power supply.
Setting
KBPWR
Disable
[1-2] (default)
Enable
[2-3]
R
Disable
(Default)
1 2 3
1 2 3
Enable
P2E-B Keyboard Power
III. INST
ALLA
TION
(Jumpers)