Инструкция для ASUS p4-p5n9300
E4261
P2-P5N9300/P4-P5N9300 Display Setting
15G067524000
Windows
®
XP/Vista OS
By default, the primary display adapter is set to the graphics card.
To set the onboard VGA/HDMI port as the primary display adapter:
To set the onboard VGA/HDMI port as the primary display adapter:
1. Connect your monitor to the graphics card.
2. Boot the system and press <Del> during the Power-On Self-Test (POST) to
2. Boot the system and press <Del> during the Power-On Self-Test (POST) to
enter the BIOS setup program.
3. Go to Advanced > Chipset. Set the Primary Display Adapter item to
[Onboard] and Onboard GPU to [Always Enable].
4. Press <F10> to save the changes, then the system reboots.
5. Disconnect your monitor from the graphics card, then connect it to the
5. Disconnect your monitor from the graphics card, then connect it to the
onboard VGA/HDMI port during the system reboot process.
The NVIDIA
®
Hybrid SLI
®
feature is automatically enabled when you install a total
system memory of 2GB or more. This feature is supported by Windows
®
Vista OS
only.