Справочник Пользователя для ASUS pike 2008

2-4

Chapter 2: RAID configuration

3.  The following screen appears. Select a channel and press <Enter> to enter 

the setup.

The numbers of the channel depend on the controller.

The RAID 1 feature supports simultaneous mirrored volumes with two disks.
The RAID 1 feature supports hot swap capability, so when a disk in an RAID 

1 volume fails, you can easily restore the volume, and the swapped disk is 

automatically re-mirrored.

To create a RAID 1 volume:
1.  Turn on the system after installing all SAS hard disk drives.
2.  During POST, press <Ctrl+C> to enter the SAS configuration utility.

To avoid data loss, do not turn off the system when rebuilding.