Справочник Пользователя для ASUS p8000
36
IV. Hardware Setup
IV
. Hardware Setup
AP8000 Hardware Reference Guide
When installing the power supply, reverse the steps: Insert the
power supply modules halfway into the chassis, secure the circled
screws, push the power supply modules in place, secure the boxed
screws as well and the 8 screws on the back of the chassis, and
then connect the power cord.
power supply modules halfway into the chassis, secure the circled
screws, push the power supply modules in place, secure the boxed
screws as well and the 8 screws on the back of the chassis, and
then connect the power cord.
IMPORTANT
Power Supply
Removing the
Entire Power
Supply Unit
Entire Power
Supply Unit
Remove the two boxed screws,
slide out the power supply mod-
ules with the support brace to the
insertion position and then re-
move the two circled screws.
slide out the power supply mod-
ules with the support brace to the
insertion position and then re-
move the two circled screws.
NOTE: A long screw-
driver is required to reach
into the chassis.
driver is required to reach
into the chassis.
Screwdriver
Power Supply Frame
After the support brace is re-
moved, the power supply mod-
ules and the frame can be re-
moved from the chassis.
moved, the power supply mod-
ules and the frame can be re-
moved from the chassis.