Справочник Пользователя для ASUS p8000
28
IV. Hardware Setup
IV
. Hardware Setup
AP8000 Hardware Reference Guide
• 4-9. Hot-Swap Tray Connector Board
The connector board is mounted on the hot-swap tray to interface with the
SCSI backplane in the chassis. The connector board combines all the signal
and power into one docking connector for a simple hot-swap unit.
SCSI backplane in the chassis. The connector board combines all the signal
and power into one docking connector for a simple hot-swap unit.
Hot-Swap Connector
Hot-Swap Tray Rear Connections
KEY: These 2 pins connect to the keylock on the tray’s front panel to
turn ON and OFF the drive’s power.
turn ON and OFF the drive’s power.
LED0: These 3 pins connect to the hard drive access LED on the
front of the tray to show when the hard disk drive accesses data.
front of the tray to show when the hard disk drive accesses data.
LED1: (Reserved)
LED2: These 3 pins connect to the power LED on the front of the
tray to show when the connector board receives power.
tray to show when the connector board receives power.
ALED_In: These 2 pins connect to the hard drive access LED on the
back of the hard drive to show when the hard drive accesses data.
back of the hard drive to show when the hard drive accesses data.
SCSI_ID: These 8 pins connect to the hard drive’s SCSI address
pins to set the SCSI ID number of the hard disk drive.
pins to set the SCSI ID number of the hard disk drive.
Hot-Swap Tray Docking Connector: Connects to the SCSI
backplane board.
backplane board.
Hard Disk Drive Power Connector: Connects to the hard drive.
68-pin SCSI Connector: Connects to the hard drive’s 68-pin SCSI
connector.
connector.
Hot-Swap Tray Connector Board Parts
Wide SCSI Connector
Hot-Swap Tray
Docking Connector
Docking Connector
Hard Disk Drive
Power Connector
Power Connector
KEY
LED0
LED1
LED2
LED1
LED2
8-pin SCSI ID
Connector
Connector
ALED_IN
Red
Black
Black
ID0
ID1
ID2
ID3
ID1
ID2
ID3
Red
Black
Green
Black
Green
Orange
Black
Green
Black
Green
BK
RD
YE
BL
BR
OR
GR
WH