Справочник Пользователя для ASUS RX3141
Chapter 3. Quick Start Guide
RX3141 User’s Manual
12
3.1.3
Step 3. Attach the AC adapter.
Attach the AC adapter to the POWER input jack on the back of the device and plug in the adapter to a wall
outlet or a power strip.
outlet or a power strip.
3.1.4
Step 4. Power on RX3141, the ADSL or cable modem and power up your
computers.
computers.
Plug the AC adapter to the power input jack of RX3141. Turn on your ADSL or cable modem. Turn on and
boot up your computer(s) and/or any LAN devices such as wireless AP, hubs or switches.
boot up your computer(s) and/or any LAN devices such as wireless AP, hubs or switches.
Cable or ADSL Modem
Internet
RX3141i
Wireless AP
Ethernet
cable
Figure 3.1. Overview of Hardware Connections
You should verify that the LEDs are illuminated as indicated in Table 3.1.
Table 3.1. LED Indicators
This LED:
...should be:
POWER
Solid green to indicate that the device is turned on. If this light
is not on, check if the AC adapter is attached to the RX3141
and if it is plugged into a power source.
is not on, check if the AC adapter is attached to the RX3141
and if it is plugged into a power source.
1 – 4
STATUS
LED
Solid green to indicate that the device can communicate with
your LAN or flashing when the device is sending or receiving
data to/from your LAN computer(s).
your LAN or flashing when the device is sending or receiving
data to/from your LAN computer(s).
WAN
Solid green to indicate that the device has successfully
established a connection with your ISP or flashing when the
device is sending or receiving data to/from the Internet.
established a connection with your ISP or flashing when the
device is sending or receiving data to/from the Internet.
If the LEDs illuminate as expected, the RX3141 is working properly.